Rheology

Edited by : Críspulo Gallegos,

University of Huelva Spain

Ken Walters,

University of Wales-Aberystwyth UK

Rheology

Crispulo Gallegos, Complex Fluid Engineering Laboratory. Departamento de Ingeniería Química. University of Huelva. 21071 Huelva, Spain

Kenneth Walters, Institute of Mathematical and Physical Sciences, Aberystwyth University, U.K.

History of Rheology

Ken Walters. , Institute of Mathematical and Physical Sciences. University of Wales. Aberystwyth Ceredigion, SY23 3BZ. UK

Continuum Mechanics as a ground of Rheology

Alexander Ya. Malkin. , Academy of Sciences. Moscow Profoyuznaya 98, korp. 5. kv. 92. Moscow 117485. Russia

The Newtonian Fluid

José Mª Franco and Pedro Partal, Dept. Ingeniería Química. Facultad de Ciencias Experimentales. Universidad de Huelva. Campus de “El Carmen”. 21071 Huelva. Spain

Non-Newtonian Fluids

Pedro Partal and José Mª Franco, Dept. Ingeniería Química. Facultad de Ciencias Experimentales. Universidad de Huelva. Campus de “El Carmen”. 21071 Huelva. Spain

Linear Viscoelasticity

Críspulo Gallegos and Francisco J. Martínez-Boza, Departamento de Ingenieria Quimica. Universidad de Huelva. 21071 Huelva. Spain.

Non-linear Viscoelasticity

John Dealy. , Department of Chemical Engineering. McGill University. 3610 University Street. Montreal, PQ H3A 2B2 Canada

Extensional Rheology

Joao Maia. IPC. , Institute for Polymer and Composites. Department of Polymer Engineering. University of Minho. 4800-058 Guimaraes. Portugal

Constitutive Modeling of Viscoelastic Fluids

Faith Morrison. , Department of Chemical Engineering. Michigan Technological University. 1400 Townsend Drive. Houghton, MI 49931-1295. USA

Computational Rheology

M.F. Webster, H.R. Tamaddon-Jahromi, and F. Belblidia, Institute of non-Newtonian Fluid Mechanics - Wales, School of Engineering, Swansea, UK

Time-Dependent Behavior of Solid Polymers

I. Emri and M. Gergesova, Center for Experimental Mechanics, University of Ljubljana, Ljubljana, Slovenia, and Institute for Sustainable Innovative Technologies, Ljubljana, Slovenia

Rheometry

Howard A. Barnes, Institute of Mathematics and Physics, Aberystwyth University, Wales, UK, SY23 3BZ
João M. Maia, Department of Macromolecular Science and Engineering, Case Western Reserve University, USA

Rheo-physical and Imaging Techniques

Peter Van Puyvelde, Christian Clasen, Paula Moldenaers, and Jan Vermant, K.U. Leuven, Department of Chemical Engineering, W. de Croylaan 46, B-3001 Leuven, Belgium

High Pressure Rheology

Francisco J. Martínez Boza and Críspulo Gallegos, Complex Fluid Engineering Laboratory. Departamento de Ingeniería Química University of Huelva, Huelva, Spain

Interfacial Rheology

Kasper Masschaele, Steven Vandebril, Jan Vermant, Department of Chemical Engineering, Katholieke Universiteit Leuven, Belgium
Basavaraj Madivala, Department of Chemical Engineering, University of Delaware, USA

Non-Newtonian Fluid Mechanics

Ken Walters, Institute of Mathematical and Physical Sciences. University of Wales. Aberystwyth Ceredigion, SY23 3BZ. UK

Mixer-Type Rheometry

Lionel Choplin and Philippe Marchal, Centre de Génie Chimique des Milieux Rhéologiquement Complexes (GEMICO), Ecole Nationale Supérieure des Industries Chimiques (ENSIC), Institut National Polytechnique de Lorraine (INPL), Nancy-Université, France

Non-Newtonian Heat Transfer

Fernando T. Pinho and Paulo J. Coelho., Centro de Estudios de Fenómenos de Transporte. Departamento de Engenharia Mecanica. Faculdade de Engenharia Mecanica. Universidade do Porto. Rua Dr. Roberto Frias, s/n. 4200-465 Porto. Portugal

Rheology in Materials Engineering

João Maia, Department of Macromolecular Science and Engineering, Case Western Reserve University, USA
José Covas, I3N - Institute for Nanostructures, Nanomodeling and Nanofabrication, Department of Polymer Engineering, University of Minho, Portugal
Bruno de Cindio, University of Calabria, Department of Engineering Modeling, Laboratory of Rheology and Food Engineering, Italy
Domenico Gabriele, University of Calabria, Department of Engineering Modeling, Laboratory of Rheology and Food Engineering, Italy

Polymer Rheology

Paula Moldenaers and Jan Mewis, Department of Chemical Engineering, K.U.Leuven, 3001 Leuven,Belgium

Suspensions, Emulsions and Foams

Pier Luca Maffettone, Dipartimento di Ingegneria Chimica, Università di Napoli Federico II Piazzale Tecchio, Italy
Francesco Greco, Istituto di Ricerche sulla Combustione, CNR, Piazzale Tecchio 80, 80125 Napoli, Italy

Food Rheology

Mats Stading. SIK., Institute for Livsmedel och Bioteknik. BOX 5401. 402 29 Göteborg. Sweeden

Rheology of Cosmetics and Pharmaceuticals

Lionel Choplin. Gemico., Groupe ENSIC. 1, rue Grandville; BP 451; F-54001 Nancy Cedex. France

Rheology of Surfactants: Wormlike Micelles and Lamellar Liquid Crystalline Phase

O. Manero, Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, México
F. Bautista, Departamento de Física, Universidad de Guadalajara, Guadalajara, México
J. E. Puig, Departamento de Ingeniería Química, Universidad de Guadalajara, Guadalajara, México

Biorheology

Bruno de Cindio and Domenico Gabriele., Department of Chemical Engineering and Materials. Cubo 45A. University of Calabria. I-87030 Arcavacata di Rende. Italy

Environmental Rheology – Rheology and the Triple Bottom Line

David Boger., Department of Chemical and Biomolecular Engineering. Melbourne School of Engineering. University of Melbourne. Parkville 3010. Australia